Maximum versatility: can be used for core, spiral and tap drilling, countersinking and reaming.

Use of very long drill tools thanks to double drill motor guide which can be adjusted in an infinitely variable manner.

Simple operating concept avoids mix-ups and can be clearly seen by the user – risk of incorrect operation is reduced.

Powerful slitting shears for stainless steel processing, spiral seam pipes and profiles.

Slitting shears have the benefits of speed and accuracy. High-quality tools like FEIN slitting shears achieve cutting speeds of up to 10 metres per minute. 

The cutting technique does not warp the material because the shears cut out a thin strip from the metal sheet. 

This technique requires relatively little feed force to be applied. Slitting shears are most suitable for cut-offs and cut-outs in spiral seam pipes and single rolled sheets. The sheet should be no more than 2 mm thick.

Easy-to-use, curve-compatible sheet metal shears for working with stainless steel.

For sheets up to 4 mm thick, we recommend sheet metal shears. Unlike slitting shears, sheet metal shears simply cut through the material.

 With a powerful motor, they achieve cutting speeds of up to 8 metres per minute. 

This cutting technique warps the material on one side. Sheet metal shears are mostly used for cut-offs and long cuts in single rolled sheets.

Powerful nibbler for heavy dismantling and cutting applications.

For corrugated, trapezoid or thick sheet metal and profiles, we recommend using a nibbler. 

This tool punches with precision through the workpiece, handling material thicknesses of up to 5 mm without warping. 

Nibblers are usually very compact, allowing you to cut curves and cut-outs with accuracy even in hard-to-reach places, for example when building control cabinets.

Sawing oil, gas and water pipes made from steel and cast iron

Milling oil, gas and water pipes made from steel and cast iron

Simple setup.

Autonomous machine working.